IBM Books

MAS V3.3 Protocol Config Ref Vol 1

Index

Numerics
A B C D E F G H I J L M N O P Q R S T U V W
Numerics
  • 8209 bridges (2771)
    • A
  • access control rule parameters (3081)
  • addresses (3084)
  • ICMP message type and code (3091)
  • IP protocol number (3085)
  • next hop gateway address selection (3096)
  • packet filter name (3103)
  • precedence and TOS filtering support (3093)
  • security logging options (3101)
  • source address verification (3105)
  • SysLog facility option (3099)
  • TCP connection establishment (SYN) filtering (3089)
  • TCP/UDP source and destination port numbers (3087)
  • type (3082)
  • access controls
  • IP filtering (3076)
  • IP monitoring command (3169)
  • IPX monitoring command (3792)
  • activate
  • CIP monitoring commands (3684)
  • RSVP monitoring command (3439)
  • Adaptive Source Routing Transparent bridge (ASRT) (2601), (2753)
  • basic configuration procedures (2793)
  • bit ordering in STB and SRB bridges (2749)
  • bridge-only management (2759)
  • bridging basics (2577)
  • bridging tunnel (2755)
  • encapsulation and OSPF (2757)
  • configuration matrix (2751)
  • configuring (2750), (2791), (2794)
  • description of (2710)
  • eliminating packet size problems (2747)
  • Ethernet packet format translation (2619)
  • hardware address filtering (2748)
  • MIB support (2761)
  • multiaccess bridge port
  • configuring (2782)
  • description (2778)
  • interoperation with 2218 (2785)
  • multiaccess database (2780)
  • overview (2582)
  • complex bridges (2587)
  • CSMA/CD MAC frames (2597)
  • local bridges (2588)
  • MAC bridge frame formats (2579), (2595)
  • operation and protocol architecture (2591)
  • point-to-point links (2593)
  • remote bridges (2589)
  • simple bridge (2586), (2592)
  • token-ring MAC frames (2599)
  • protocol filtering (2583)
  • source routing bridge (SRB) (2666)
  • operation (2669)
  • source routing frames (2671)
  • spanning tree explore option (2675)
  • spanning tree bridges (2618)
  • spanning tree explore option
  • balancing traffic loads (2680)
  • simulating a network (2678)
  • SR-TB bridging (2715)
  • SR-TB Conversion
  • SR-TB conversion
  • description of (2711)
  • general description (2712)
  • operation (2713), (2714)
  • SRB terminology and concepts
  • bridge instance (2683)
  • bridge number (2685)
  • explorer frames (2687)
  • interface number (2689)
  • overview (2682)
  • route (2691)
  • route discovery (2693)
  • segment number (2695)
  • source routing (2697)
  • TCP/IP host services (2760)
  • terminology and concepts (2624), (2716)
  • aging time (2626)
  • all routes broadcast (2718)
  • all stations broadcast (2720)
  • bridge (2628), (2722)
  • bridge address (2630)
  • bridge hello time (2632)
  • bridge identifier (2634)
  • bridge maximum age (2636)
  • bridge number (2724)
  • bridge priority (2638)
  • designated port (2642)
  • destination bridge (2640)
  • explorer frames (2726)
  • filtering and permanent databases (2644)
  • parallel bridges (2646)
  • path cost (2648)
  • port (2650)
  • port ID (2652)
  • port number (2654)
  • port priority (2656)
  • resolution (2658)
  • ring number (2728)
  • root bridge (2660)
  • root port (2662)
  • route (2730)
  • route designator (2732)
  • route discovery (2734)
  • segment number (2736)
  • single route broadcasting (2738)
  • source routing bridging (2740)
  • spanning tree (2664), (2742)
  • transparent bridging (2744)
  • transparent bridge (STB)
  • network requirements (2608)
  • operation of (2611)
  • overview (2603)
  • routers and transparent bridges (2605)
  • shaping the spanning tree (2616)
  • transparent-source routing compatibility (2746)
  • add
  • ARP over ATM configuration commands (3614)
  • ASRT bridge configuration command (2810)
  • ASRT bridge monitoring command (2876)
  • BAN configuration command (2850)
  • CIP configuration commands (3613)
  • DLSw configuration command (3510)
  • DVMRP configuration command (3392)
  • IP configuration command (3140)
  • IP route filter policy configuration command (3163)
  • IPX configuration command (3742)
  • IPX over ATM configuration command (3616)
  • OSPF configuration command (3250)
  • RSVP configuration command (3431)
  • SNMP configuration command (3456)
  • SNMP monitoring command (3471)
  • TCP/IP host services configuration command (3002)
  • Tunnel configuration command (2861)
  • add entry
  • ARP configuration commands (3582)
  • address entries
  • dynamic (2836), (2884), (2896)
  • free (2837), (2885)
  • permanent (2834), (2882), (2894)
  • registered (2833), (2881), (2893)
  • reserved (2832)
  • static (2835)
  • addresses, entering
  • CIP (3566)
  • advertisement Expansion
  • OSPF monitoring command (3268)
  • AppleTalk
  • split-horizon routing (3736)
  • APPN
  • interface support (3493)
  • area summary
  • OSPF monitoring command (3270)
  • ARP
  • configuring (3575)
  • displaying statistics (3674)
  • monitoring (3655)
  • translation cache (3546)
  • with AppleTalk threading (2777)
  • with IP threading (2774)
  • ARP configuration commands
  • add entry (3583)
  • change entry (3585)
  • delete entry (3587)
  • disable auto-refresh (3589)
  • enable auto-refresh (3593)
  • list (3595)
  • set (3598)
  • summary of (3580)
  • ARP monitoring commands
  • accessing (3652)
  • clear (3659)
  • dump (3663)
  • hardware (3666)
  • protocols (3669)
  • redundancy-state (3715)
  • statistics (3672)
  • summary of (3654)
  • ARP over ATM
  • add (3617)
  • Classical IP, description (3548)
  • configuration commands, summary (3604)
  • effect on ARP table (3611)
  • IPX and ARP over ATM, description (3569)
  • ARP over ATM configuration commands
  • accessing (3577)
  • add (3626)
  • delete (3632)
  • list (3644)
  • reorder (3648)
  • ARP over ATM monitoring commands
  • delete (3689)
  • display (3694)
  • dump (3699)
  • hardware (3704)
  • ping (3709)
  • protocol (3714)
  • statistics (3721)
  • summary of (3675)
  • ARP table
  • CIP (3610)
  • IPX over ATM (3609)
  • AS boundary routing, OSPF (3229)
  • AS-external advertisements
  • OSPF monitoring command (3272)
  • ASRT
  • See Adaptive Source Routing Transparent bridge (2578), (2602), (2754)
  • ASRT bridge configuration commands
  • add (2809)
  • and IP tunnel (2845)
  • ASRT Bridge configuration command (2841)
  • ban (2817)
  • BAN commands (2847)
  • BAN configuration commands
  • add (2849)
  • delete (2852)
  • list (2855)
  • change (2819)
  • delete (2821)
  • disable (2825)
  • duplicate MAC addresses (2812)
  • enable (2827)
  • functional address to group address mapping (2813)
  • IP tunnel commands (2858)
  • list (2829)
  • NetBIOS filtering commands
  • summary (2942)
  • NetBIOS filtering concepts (2763)
  • NetBIOS filtering configuration commands
  • create (2944)
  • delete (2947)
  • disable (2950)
  • enable (2953)
  • filter-on (2956)
  • list (2959)
  • update (2962)
  • port maps explained (2811)
  • set (2840)
  • summary of (2796)
  • tunnel (2843)
  • tunnel configuration commands
  • add (2860)
  • delete (2863)
  • join (2866)
  • list (2869)
  • ASRT bridge monitoring commands
  • add (2875)
  • ban (2877)
  • BAN monitoring commands
  • discussion (2901)
  • list (2903)
  • cache (2879)
  • delete (2887)
  • flip (2889)
  • list (2891)
  • NetBIOS (2897)
  • NetBIOS filtering monitoring commands
  • list (2967)
  • summary (2965)
  • ASRT bridge NetBIOS feature
  • prompt (2802), (2872)
  • ASRT bridge NetBIOS-filtering feature
  • prompt (2804), (2874)
  • ASRT bridge tunnel feature
  • prompt (2800)
  • ASRT configuration commands
  • list
  • filtering (2831)
  • netbios (2839)
  • assigning IP addresses to bridge network interfaces (3058)
  • ATM addresses
  • CIP (3562)
  • ATM addressing in IPX
  • ESI (3052)
  • selector (3051)
  • attach
  • IPX filter configuration command (3760)
  • auto-refresh
  • disabling (3590)
  • enabling (3591)
    • B
  • balancing SNA and NetBIOS traffic (3495)
  • BAN
  • ASRT bridge configuration command (2818)
  • ASRT bridge monitoring command (2878)
  • DLSw (3512), (3539)
  • opening service access points (2790)
  • BAN configuration commands
  • add (2848)
  • delete (2851)
  • list (2854)
  • summary (2846)
  • BAN monitoring Commands
  • BAN monitoring commands
  • accessing (2899)
  • discussion (2900)
  • list (2902)
  • BGP
  • configuring (3310)
  • connections between autonomous systems (3308)
  • default originate policy (3318)
  • defining neighbors (3312)
  • defining policies (3314)
  • enabling (3311)
  • excluding routes (3319)
  • how BGP works (3306)
  • including routes (3317)
  • internal and external neighbors (3313)
  • messages (3309)
  • overview (3305)
  • policy types (3315)
  • receive policy (3320)
  • routes
  • advertising all (3324)
  • blocking specific (3322)
  • importing all (3321)
  • sample policy definitions (3316)
  • send policy (3323)
  • TCP connections (3307)
  • BGP configuration commands (3326), (3332), (3337), (3345), (3350) , (3355)
  • add
  • aggregate (3327)
  • neighbor (3328)
  • no-receive (3329)
  • receive (3330)
  • send (3331)
  • change
  • change originate (3333)
  • change receive (3335)
  • change send (3336)
  • delete
  • aggregate (3338)
  • neighbor (3339)
  • no (3340)
  • originate (3341)
  • receive (3343)
  • send (3344)
  • disable
  • bgp speaker (3346)
  • classless-bgp (3347), (3348)
  • neighbor (3349)
  • enable
  • bgp speaker (3351)
  • classless-bgp (3352)
  • compare-med-from-diff-AS (3353)
  • neighbor (3354)
  • list
  • aggregate (3356)
  • all (3357)
  • bgp speaker (3358)
  • neighbor (3359)
  • no (3360)
  • originate (3361)
  • receive (3363)
  • send (3364)
  • move (3365)
  • policy-to-neighbor (3334), (3342), (3362)
  • set (3366)
  • update (3367)
  • BGP monitoring commands
  • destinations (3369)
  • advertised (3370)
  • received (3371)
  • disable neighbor (3372)
  • dump routing tables (3373)
  • enable neighbor (3376)
  • neighbors (3377)
  • parameter (3378)
  • paths (3379)
  • ping (3380)
  • policy-list (3382)
  • reset neighbor (3384)
  • sizes (3385)
  • traceroute (3386)
  • BOOTP
  • enabling/disabling (3115)
  • server (3118)
  • Bootstrap monitor
  • forwarding process (3113)
  • Bootstrap protocol (3112)
  • Boundary Access Node (BAN)
  • configuring (2788)
  • using (2787)
  • boundary routing, OSPF (3231)
  • bridge
  • MAC frame formats (2580), (2596)
  • point-to-point links (2594)
  • bridge and router (2607)
  • bridge network interface (3060)
  • bridges
  • basic operation (2590)
  • overview (2581)
  • types (2585)
  • versus routers (2584)
  • bridging and routing (3028)
  • overview of RFC 1483 support (3035)
  • RFC 1483 support for IPX routing (3037)
  • support for IPX routing (3047)
  • support of PVCs and SVCs (3046)
  • bridging features (2752)
  • bridging tunnel
  • description of (2756)
  • encapsulation and OSPF (2758)
    • C
  • cache
  • ASRT bridge monitoring command (2880)
  • IP monitoring command (3171)
  • IPX monitoring command (3794)
  • TCP/IP host services monitoring command (3019)
  • change
  • ARP over ATM configuration commands (3623)
  • ASRT bridge configuration command (2820)
  • CIP configuration commands (3622)
  • DVMRP configuration command (3394)
  • IP configuration command (3142)
  • IPX over ATM configuration command (3625)
  • change entry
  • ARP configuration command (3584)
  • CIP
  • ATM addresses (3561)
  • components (3554)
  • configuration commands, summary (3602)
  • configuring (3573)
  • description (3550)
  • differences from IPX over ATM (3606)
  • effect on ARP table (3608)
  • how to enter addresses (3567)
  • IP addresses (3559)
  • key configuration parameters (3565)
  • logical IP subnets (LIS) (3551)
  • refresh (3557)
  • timeout (3555)
  • virtual channel connection (VCC) (3563)
  • CIP configuration commands
  • accessing (3576)
  • add (3612)
  • change (3621)
  • delete (3627)
  • disable (3633)
  • Enable (3636)
  • list (3639)
  • Reorder (3645)
  • set (3649)
  • CIP monitoring commands
  • activate (3683)
  • delete (3685)
  • display (3690)
  • dump (3695)
  • hardware (3700)
  • ping (3705)
  • protocols (3710)
  • statistics (3717)
  • summary of (3676)
  • Classical IP and ARP over ATM
  • description (3549)
  • clear
  • ARP monitoring commands (3660)
  • IPX circuit-based filter command (3826), (3828)
  • close SAP
  • DLSw configuration command (3514)
  • command summary
  • BGP (3325), (3368)
  • LNM (2975)
  • configuration commands
  • DLSw (2914)
  • LNM (2976)
  • NetBIOS (2915)
  • configuration environment
  • accessing (2919)
  • configuration parameters
  • setting for ARP (3599)
  • configuring
  • Gateway, redundant IP (3130)
  • multiaccess bridge port (2784)
  • redundant IP Gateway (3129)
  • configuring IPX (3737)
  • configuring Virtual Router Redundancy Protocol (3127)
  • counters
  • IP monitoring command (3173)
  • IPX monitoring command (3796)
  • create (2945)
  • IPX filter configuration command (3762)
    • D
  • database
  • permanent (2883), (2895)
  • database summary
  • OSPF monitoring command (3274)
  • default
  • IPX filter configuration command (3764)
  • delete
  • ARP over ATM configuration commands (3629)
  • ARP over ATM monitoring commands (3688)
  • ASRT bridge configuration command (2822)
  • ASRT bridge monitoring command (2888)
  • BAN configuration command (2853)
  • CIP configuration commands (3628)
  • CIP monitoring commands (3686)
  • DLSw configuration command (3516)
  • DVMRP configuration command (3396)
  • IP configuration command (3144)
  • IPX configuration command (3744), (3798)
  • IPX filter configuration command (3766)
  • IPX over ATM configuration command (3631)
  • IPX over ATM monitoring commands (3687)
  • NetBIOS filtering configuration command (2948)
  • OSPF configuration command (3252)
  • RSVP configuration command (3433)
  • SNMP configuration command (3458)
  • SNMP monitoring command (3473)
  • TCP/IP host services configuration command (3004)
  • Tunnel configuration command (2864)
  • delete entry
  • ARP configuration command (3586)
  • demand circuit (3239)
  • detach
  • IPX filter configuration command (3768)
  • disable
  • ARP over ATM configuration commands (3635)
  • ASRT bridge configuration command (2826)
  • CIP configuration commands (3634)
  • DLSw configuration command (3518)
  • DVMRP configuration command (3398)
  • IP configuration command (3146)
  • IPX circuit-based filter command (3830)
  • IPX configuration command (3746), (3800)
  • IPX filter configuration command (3770)
  • LNM configuration command (2980)
  • NetBIOS filtering configuration command (2951)
  • OSPF configuration command (3254)
  • RSVP configuration command (3434)
  • SNMP configuration command (3460), (3462)
  • SNMP monitoring command (3475), (3477)
  • TCP/IP host services configuration command (3006)
  • disable auto-refresh
  • ARP configuration command (3588)
  • display
  • ARP over ATM monitoring commands (3693)
  • CIP monitoring commands (3691)
  • IPX over ATM monitoring commands (3692)
  • DLSw
  • configuration environment (2920)
  • configuration procedure (3506)
  • configuration requirements (3498)
  • configuring (3505)
  • configuring ASRT for DLSw (3499)
  • configuring IP for DLSw (3500), (3501)
  • configuring NetBIOS for (2922)
  • configuring the SDLC interface (3502)
  • interoperability considerations (3836)
  • interoperability with IBM 6611
  • bridge configuration (3835)
  • IP configuration considerations (3837)
  • monitoring (3535)
  • multicast addresses (3523)
  • overview (3486)
  • TCP interoperability considerations (3838)
  • using (3484)
  • X.25 requirement for QLLC (3503)
  • DLSw configuration commands
  • add (3509)
  • BAN (3511)
  • close SAP (3513)
  • delete (3515)
  • disable (3517)
  • enable (3519)
  • join group (3521)
  • leave group (3524)
  • list (3526)
  • priority (3528)
  • netbios (3529), (3543)
  • open SAP (3531)
  • set (3533)
  • summary of (3507)
  • DLSw monitoring commands
  • add (3538)
  • list
  • dls sessions nb (3540)
  • tcp capabilities (3541)
  • tcp statistics (3542)
  • netbios (3530), (3544)
  • set
  • priority (3545)
  • summary of (3536)
  • dump
  • ARP monitoring commands (3664)
  • ARP over ATM monitoring commands (3698)
  • CIP monitoring commands (3696)
  • IPX monitoring command (3802)
  • IPX over ATM monitoring commands (3697)
  • SCSP monitoring command (3730)
  • TCP/IP host services monitoring command (3017)
  • dump routing tables
  • BGP monitoring command (3374)
  • DVMRP monitoring command (3405)
  • IP monitoring command (3175)
  • OSPF monitoring command (3276)
  • DVMRP
  • monitoring (3388)
  • DVMRP configuration commands
  • add (3391)
  • change (3393)
  • delete (3395)
  • disable (3397)
  • enable (3399)
  • list (3401)
  • summary of (3390)
  • DVMRP monitoring commands
  • dump routing tables (3404)
  • interface summary (3406)
  • join (3408)
  • leave (3410)
  • mcache (3412)
  • mgroups (3414)
  • summary of (3403)
  • Dynamic Address (3056)
    • E
  • enable
  • ARP over ATM configuration commands (3638)
  • ASRT bridge configuration command (2828)
  • CIP configuration commands (3637)
  • DLSw configuration command (3520)
  • DVMRP configuration command (3400)
  • IP configuration command (3149)
  • IPX circuit-based filter command (3832)
  • IPX configuration command (3748), (3804)
  • IPX filter configuration command (3772)
  • LNM configuration command (2983)
  • NetBIOS filtering configuration command (2954)
  • OSPF configuration command (3256)
  • RSVP configuration command (3435)
  • TCP/IP host services configuration command (3008)
  • enable auto-refresh
  • ARP configuration command (3592)
  • enabling access control (3077)
  • end system identifier (ESI) (3049)
  • exit (2807)
  • console command (2808)
    • F
  • filter-lists
  • IPX configuration command (3750)
  • IPX monitoring command (3808)
  • filter-on (2957)
  • filters
  • IPX monitoring command (3806)
  • flip
  • ASRT bridge monitoring command (2890)
  • forwarding process (3114)
  • frame command (3752)
  • frame size
  • for NetBIOS (2928)
  • fully meshed network (3040)
  • functional address to group address mapping (2814)
    • G
  • getting help (2805)
  • global access control list, defining (3078)
    • H
  • hardware
  • ARP monitoring commands (3667)
  • ARP over ATM monitoring commands (3703)
  • CIP monitoring commands (3701)
  • IPX over ATM monitoring commands (3702)
  • help
  • console command (2806)
    • I
  • ICMP message type and code (3092)
  • IGMP
  • igmp
  • configuring (3159)
  • IP configuration command (3177)
  • IGP (Interior Gateway Protocol) (3211)
  • interface addresses
  • IP monitoring command (3179)
  • interface summary
  • DVMRP monitoring command (3407)
  • OSPF monitoring command (3278)
  • interface, bridge network (3059)
  • internal IP address (3062)
  • Inverse ARP
  • configuration commands (3581)
  • configuring (3574)
  • overview (3547)
  • IP (3126)
  • adding UDP Broadcast destinations (3125)
  • addresses, assigning to the bridge network interface (3061)
  • addressing network interfaces (3054)
  • ARP net routing (3073)
  • ARP subnet routing (3072)
  • autonomous systems (3212)
  • BootP/DHCP forwarding process (3111)
  • configuring (3136)
  • disabling BOOTP forwarding (3117)
  • disabling UDP Forwarding (3123)
  • dynamic routing (3064)
  • enabling BOOTP forwarding (3116)
  • enabling UDP Forwarding (3122)
  • interior gateway protocols (3210)
  • monitoring (3165)
  • OSPF and multicast routing (3220)
  • OSPF protocol (3065), (3209)
  • RIP protocol (3067), (3213)
  • RSVP protocol (3419)
  • setting the internal address (3063)
  • sizes command (3196)
  • static routing (3070)
  • IP addresses
  • CIP (3560)
  • IP and SNA integration
  • TN3270E Server (3119)
  • IP basic configuration procedures (3053)
  • using Dynamic Address (3055)
  • using Simple Internet Access (3134)
  • IP configuration commands
  • add (3139)
  • change (3141)
  • delete (3143)
  • disable (3145)
  • enable (3148)
  • igmp (3176)
  • list (3153)
  • move (3155)
  • set (3157)
  • summary of (3138)
  • update (3160)
  • IP filtering
  • access controls (3075)
  • description (3074)
  • route filtering without policies (3107)
  • using routing policies (3109)
  • IP monitoring commands (3180)
  • access controls (3168)
  • cache (3170)
  • counters (3172)
  • dump routing tables (3174)
  • interface addresses (3178)
  • ping (3182)
  • reset (3184)
  • RIP (3186)
  • RIP-Policy (3188)
  • route (3190)
  • static routes (3194), (3197)
  • summary of (3167)
  • traceroute (3199)
  • udp-forwarding (3201)
  • vrid (3203)
  • vrrp (3205)
  • IP multicast support
  • configuring the router (3132)
  • description (3131)
  • enrolling the router (3133)
  • IP protocol number for filtering (3086)
  • IP protocol RSVP (3426)
  • IP route filter policy configuration commands
  • add (3162)
  • IP route filtering using policies (3110)
  • IP route filtering without policies (3108)
  • IP routing (3031)
  • IP tunnel configuration commands (2857)
  • IP tunnel feature
  • ASRT bridge (2797)
  • IPX
  • addressing (3732)
  • description (3731)
  • monitoring (3788)
  • routing
  • update interval (3733)
  • IPX circuit filters
  • configuring (3734)
  • IPX configuration commands (3751)
  • add (3741)
  • delete (3743), (3797)
  • disable (3745), (3799)
  • enable (3747), (3803)
  • filter-lists (3749)
  • list (3753)
  • move (3755)
  • set (3757)
  • summary of (3740)
  • IPX filter configuration commands
  • attach (3759)
  • create (3761)
  • default (3763)
  • delete (3765)
  • detach (3767)
  • disable (3769)
  • enable (3771)
  • list (3773)
  • move (3775)
  • set-cache (3777)
  • update (3779)
  • add (3781)
  • add (IPX) (3785)
  • add (RIP) (3783)
  • add (Router) (3782)
  • add (SAP) (3784)
  • delete (3786)
  • move (3787)
  • IPX monitoring commands
  • access controls (3791)
  • cache (3793)
  • circuit-based filter commands
  • clear (3825), (3827)
  • disable (3829)
  • enable (3831)
  • list (3833)
  • counters (3795)
  • dump routing tables (3801)
  • filter-lists (3807)
  • filters (3805)
  • ipxwan (3809)
  • list (3811)
  • ping (3813)
  • recordroute (3815)
  • reset (3817)
  • sizes (3819)
  • slist (3821)
  • summary of (3789)
  • traceroute (3823)
  • IPX over ATM
  • configuration commands, summary (3603)
  • description (3568)
  • differences from CIP (3605)
  • effect on ARP table (3607)
  • IPX over ATM configuration commands
  • add (3615)
  • change (3624)
  • delete (3630)
  • list (3642)
  • IPX routing (3032), (3048)
  • IPX routing support by RFC 1483 (3039)
  • ipxwan command (3810)
    • J
  • join
  • DVMRP monitoring commands (3409)
  • OSPF configuration command (3258)
  • OSPF monitoring command (3280)
  • Tunnel configuration command (2867)
  • join group
  • DLSw configuration command (3522)
    • L
  • LAN Network Manager
  • See LNM (2969)
  • leave
  • DVMRP monitoring command (3411)
  • OSPF configuration command (3260)
  • OSPF monitoring command (3282)
  • leave group
  • DLSw configuration command (3525)
  • LIS (3553) See also logical IP subnets
  • list (3192)
  • ARP configuration commands (3594)
  • ARP over ATM configuration commands (3641)
  • ASRT bridge configuration command (2830)
  • ASRT bridge monitoring command (2892)
  • BAN configuration command (2856)
  • BAN monitoring command (2904)
  • CIP configuration commands (3640)
  • DLSw configuration command (3527)
  • DVMRP configuration command (3402)
  • IP configuration command (3154)
  • IPX circuit-based filter command (3834)
  • IPX configuration command (3754)
  • IPX filtering configuration command (3774)
  • IPX monitoring command (3812)
  • IPX over ATM configuration command (3643)
  • LNM configuration command (2988)
  • NetBIOS filtering configuration command (2960)
  • NetBIOS filtering monitoring command (2968)
  • OSPF configuration command (3262)
  • RSVP configuration command (3436)
  • RSVP monitoring command (3440)
  • SCSP monitoring command (3723), (3726)
  • SNMP configuration command (3464)
  • SNMP monitoring command (3479)
  • TCP/IP host services configuration command (3010)
  • tunnel configuration command (2870)
  • list devices command (3579)
  • LLC device support (3490)
  • LNM
  • agents and functions (2971)
  • and LLC2 support (2973)
  • configuration commands (2978)
  • configuration restrictions (2972)
  • configuring (2974)
  • overview (2970)
  • LNM configuration commands
  • disable (2979)
  • agent port# (2981)
  • enable (2982)
  • agent port# (2984)
  • configuration (2986)
  • lnm port# (2985)
  • list (2987)
  • password (2989)
  • port port# (2990)
  • set (2995)
  • LNM monitoring commands
  • list (2991)
  • bridge (2992)
  • lnm ports (2993)
  • source (2994)
  • logical IP subnets
  • description (3552)
    • M
  • MAC addresses (2842)
  • MAC frames
  • CSMA/CD (2598)
  • token-ring (2600)
  • mcache
  • DVMRP monitoring command (3413)
  • OSPF monitoring command (3284)
  • memory allocation
  • for NetBIOS UI frames (2930)
  • meshed networks (3042)
  • metric, using to determine OSPF costs (3234)
  • mgroups
  • DVMRP monitoring command (3415)
  • OSPF monitoring command (3286)
  • monitoring
  • ARP over ATM monitoring commands (3679)
  • CIP monitoring commands (3677)
  • IPX over ATM monitoring commands (3678)
  • monitoring commands
  • ARP over ATM (3682)
  • CIP (3680)
  • DLSw (2916)
  • IPX over ATM (3681)
  • LNM (2977)
  • NetBIOS (2917)
  • move
  • IP configuration command (3156)
  • IPX configuration command (3756)
  • IPX filter configuration commands (3776)
  • mstat
  • OSPF monitoring command (3417)
  • mstats
  • OSPF monitoring command (3288)
  • multiaccess bridge port
  • configuring (2783)
  • description (2779)
  • interoperation with 2218 (2786)
  • multiaccess database (2781)
  • multicast exploration (3489)
  • multiple spanning trees, problems with (2769)
    • N
  • name lists
  • committing changes (2909)
  • configuring (2907)
  • configuring and monitoring (2933)
  • overview (2906)
  • using (2911)
  • neighbor discovery (3488)
  • neighbor priority (3494)
  • neighbor summary
  • OSPF monitoring command (3290)
  • NetBIOS
  • ASRT bridge (2798)
  • ASRT bridge monitoring command (2898)
  • balancing traffic with SNA (3497)
  • committing name list changes (2910)
  • configuring for DLSw (2921)
  • configuring name lists (2908)
  • frame size (2927)
  • memory allocation
  • for UI frames (2929)
  • name lists overview (2905)
  • opening NetBIOS SAPS for DLSw (2923)
  • session priority (2925)
  • using name lists (2912)
  • NetBIOS commands
  • configuration commands (2931)
  • add (2934)
  • delete (2935)
  • disable (2936)
  • enable (2937)
  • list (2938)
  • set (2939)
  • monitoring
  • summary (2932)
  • NetBIOS filtering
  • basic configuration procedures (2913)
  • building a filter (2767)
  • concepts (2764)
  • prompt (2803)
  • simple and complex filters (2768)
  • using bytes (2766)
  • using host-names (2765)
  • NetBIOS filtering configuration commands
  • create (2943)
  • delete (2946)
  • disable (2949)
  • enable (2952)
  • filter-on (2955)
  • list (2958)
  • summary of (2941)
  • update (2961)
  • NetBIOS filtering monitoring commands
  • list (2966)
  • summary of (2964)
  • NetBIOS name caching
  • description (2762)
  • NetBIOS prompt (2801), (2871)
  • NetBIOS-filtering prompt (2873)
  • network circuit
  • monitoring process (3790)
  • network hardware
  • displaying ARP-registered (3668)
  • network interface
  • clearing (3662)
  • next hop gateway address selection (3098)
  • non-volatile configuration memory
  • configuring (2918)
    • O
  • open SAP
  • DLSw configuration command (3532)
  • operational software files (3034)
  • OSPF
  • advantages over RIP (3216)
  • areas (3224)
  • AS boundary routing (3232)
  • configuration parameters (3246)
  • configuring (3208)
  • configuring over ATM (3235)
  • converting from RIP (3245)
  • demand circuit (3238)
  • description of (3215)
  • designated router (3218)
  • enabling (3066), (3221)
  • IP multicast routing (3219)
  • IP multicast routing, sort string (3226)
  • migrating from IBM 6611 (3247)
  • network interface parameters (3225)
  • non-broadcast network interface parameters (3228)
  • parameters for attached areas (3223)
  • poll interval (3242)
  • request hello suppression (3240)
  • RIP comparison (3237)
  • router IDs (3222)
  • routing explained (3217)
  • sort string IP multicast routing (3227)
  • virtual links (3236)
  • OSPF configuration commands
  • add (3249)
  • delete (3251)
  • disable (3253)
  • enable (3255)
  • join (3257)
  • leave (3259)
  • list (3261)
  • set (3263)
  • summary of (3248)
  • OSPF monitoring commands
  • advertisement expansion (3267)
  • area summary (3269)
  • AS-external advertisements (3271)
  • database summary (3273)
  • dump routing tables (3275)
  • interface summary (3277)
  • join (3279)
  • leave (3281)
  • mcache (3283)
  • mgroups (3285)
  • mstat (3416)
  • mstats (3287)
  • neighbor summary (3289)
  • ping (3291)
  • policy (3293)
  • routers (3297)
  • size (3299)
  • statistics (3301)
  • summary of (3266)
  • traceroute (3295)
  • weight (3303)
  • overview of routing (3029)
    • P
  • packet filter name (3104)
  • packet filters
  • defining (3079)
  • setting up access control rules (3080)
  • packet-filter (3181)
  • partially meshed network (3041)
  • permanent virtual circuits (3044)
  • ping
  • ARP over ATM monitoring commands (3708)
  • BGP monitoring command (3381)
  • CIP monitoring commands (3706)
  • IP monitoring command (3183)
  • IPX monitoring command (3814)
  • IPX over ATM monitoring commands (3707)
  • OSPF monitoring command (3292)
  • TCP/IP host services monitoring command (3021)
  • policy
  • OSPF monitoring command (3294)
  • policy-based routing (3097)
  • policy-list
  • BGP monitoring command (3383)
  • poll interval (3243)
  • port map (2838), (2886)
  • precedence and TOS filtering support (3094)
  • protocol
  • RSVP (3427)
  • protocol filters
  • Ethernet Type (2816), (2824)
  • SNAP packets (2815), (2823)
  • protocols
  • Adaptive Source Routing Transparent bridge (ASRT) (2792), (2795)
  • ARP (3570), (3656)
  • ARP monitoring commands (3670)
  • ARP over ATM monitoring commands (3713)
  • CIP monitoring commands (3711)
  • Classical IP and ARP over ATM (3657)
  • classical IP and ARP over ATM (3572)
  • displaying ARP-registered (3671)
  • DVMRP (3389)
  • inverse arp (3571)
  • IP (3137), (3164)
  • IPX (3739)
  • IPX and ARP over ATM (3658)
  • IPX over ATM monitoring commands (3712)
  • LAN and Internetworking
  • IPX (3738)
  • OSPF (3214)
  • OSPF (3207)
  • RIP (3069), (3151)
  • SNMP (3446), (3453), (3468)
  • TCP/IP host services (2998), (3014)
  • PVCs (3043)
    • Q
  • QLLC
  • configuring (3508)
  • device support (3492)
  • monitoring (3537)
  • X.25 requirement for DLSw (3504)
  • QoS in RSVP (3422)
    • R
  • recordroute
  • IPX monitoring commands (3816)
  • redundancy
  • ARP monitoring commands (3716)
  • redundancy configuration command (3618)
  • redundancy configuration commands
  • redundancy (3619)
  • refresh
  • CIP (3558)
  • refresh timer
  • setting (3600)
  • reorder
  • ARP over ATM configuration command (3647)
  • CIP configuration commands (3646)
  • request hello suppression (3241)
  • reset
  • IP monitoring command (3185)
  • IPX monitoring commands (3818)
  • RSVP monitoring command (3441)
  • Resource ReSerVation Protocol (RSVP)
  • configuring and monitoring (3425)
  • RFC 1483 (3027)
  • overview (3036)
  • support for IPX routing (3038)
  • RFCs (3026), (3033)
  • RIP
  • converting to OSPF (3244)
  • enabling (3068)
  • IP monitoring command (3187)
  • OSPF routes (3233)
  • processing (3150)
  • RIP-Policy
  • IP monitoring command (3189)
  • RIP/SAP
  • disable/enable (3147)
  • RIP2 (3152)
  • route
  • IP monitoring command (3191)
  • route-table-filtering (3193)
  • router
  • displaying ARP configuration of (3596)
  • displaying redundancy configuration of (3620)
  • routers
  • OSPF monitoring command (3298)
  • TCP/IP host services monitoring command (3025)
  • routing
  • OSPF (3230)
  • routing between bridging and routing interfaces (3057)
  • routing overview (3030)
  • routing tables
  • BGP dump command (3375)
  • RSVP
  • configuration commands (3430)
  • how it works (3420)
  • link types supported (3423)
  • monitoring commands (3438)
  • QoS (3421)
  • sample configuration (3424)
  • using (3418)
  • RSVP configuration commands
  • accessing (3428)
  • add (3432)
  • summary of (3429)
    • S
  • SAPS
  • opening NetBIOS SAPs for DLSw (2924)
  • save
  • SNMP monitoring command (3481)
  • SCSP monitoring command (3722)
  • SCSP monitoring commands
  • dump (3729)
  • list (3725)
  • stat (3727)
  • SDLC
  • device support (3491)
  • security logging options (3102)
  • selector (3050)
  • send
  • RSVP monitoring command (3442)
  • service access points
  • opening (2789)
  • session priority
  • for NetBIOS and DLSw (2926)
  • set
  • ARP configuration commands (3597)
  • ARP over ATM configuration commands (3651)
  • CIP configuration commands (3650)
  • DLSw configuration command (3534)
  • IP configuration command (3158)
  • IPX configuration command (3758)
  • LNM configuration command (2996)
  • OSPF configuration command (3264)
  • RSVP configuration command (3437)
  • SNMP configuration command (3466)
  • TCP/IP host services configuration command (3012)
  • set-cache
  • IPX filter configuration command (3778)
  • show
  • RSVP configuration command (3443)
  • Simple Internet Access (3135)
  • size
  • OSPF monitoring command (3300)
  • sizes
  • IPX monitoring command (3820)
  • slist
  • IPX monitoring command (3822)
  • SNA
  • balancing traffic with NetBIOS (3496)
  • DLSw (3485)
  • SNMP
  • authentication scheme (3449)
  • community (3448)
  • configuring (3445), (3452)
  • MIB support (3450)
  • monitoring (3467)
  • overview (3447)
  • trap messages (3451)
  • SNMP configuration commands
  • add (3455)
  • delete (3457)
  • disable (3459), (3461)
  • list (3463)
  • set (3465)
  • summary of (3454)
  • SNMP monitoring commands
  • add (3470)
  • delete (3472)
  • disable (3474), (3476)
  • list (3478)
  • save (3480)
  • statistics (3482)
  • summary of (3469)
  • source address verification (3106)
  • Source Routing
  • terminology and concepts
  • all routes broadcast (2719)
  • all stations broadcast (2721)
  • bridge (2723)
  • bridge number (2725)
  • explorer frames (2727)
  • ring number (2729)
  • route (2731)
  • route designator (2733)
  • route discovery (2735)
  • segment number (2737)
  • single route broadcasting (2739)
  • source routing bridging (2741)
  • spanning tree (2743)
  • transparent bridging (2745)
  • threading (2772)
  • Source Routing bridge
  • description of (2667)
  • frame types (2672), (2676)
  • operation of (2670)
  • Routing Information Field (2673)
  • spanning tree explorer frame (2674)
  • terminology and concepts (2717)
  • bridge instance (2684)
  • bridge number (2686)
  • explorer frames (2688)
  • interface number (2690)
  • route (2692)
  • route discovery (2694)
  • segment number (2696)
  • source routing (2698)
  • Source Routing Transparent bridge
  • architecture (2702)
  • description of (2699)
  • general description (2700)
  • operation of (2701)
  • terminology (2703)
  • explorer frames (2704)
  • routing information field (RIF) (2705)
  • routing information indicator (RII) (2706)
  • source routing (2707)
  • spanning tree (2708)
  • transparent bridging (2709)
  • Spanning Tree bridge (2610)
  • explore option (2677)
  • Spanning tree network
  • balancing traffic loads (2681)
  • simulation of (2679)
  • spanning tree protocol
  • with 8209 bridges (2770)
  • split-horizon routing
  • for AppleTalk (3735)
  • stat
  • SCSP monitoring command (3728)
  • static routes
  • IP monitoring command (3195), (3198)
  • static routing
  • interaction between static routing and dynamic routing (3071)
  • statistics
  • ARP monitoring commands (3673)
  • ARP over ATM monitoring commands (3719)
  • CIP monitoring commands (3718)
  • IPX over ATM monitoring commands (3720)
  • OSPF monitoring command (3302)
  • SNMP monitoring command (3483)
  • stop-rsvp
  • RSVP monitoring command (3444)
  • SVCs (3045)
  • SysLog facility option (3100)
    • T
  • Talk
  • OPCON command (3166), (3265), (3578), (3653), (3724)
  • TCP
  • interoperability considerations with DLSw (3839)
  • TCP connection establishment (SYN) filtering (3090)
  • TCP connections (3487)
  • TCP/IP host services
  • basic configuration procedures (2999)
  • configuring (2997)
  • monitoring (3013)
  • TCP/IP host services configuration commands
  • add (3001)
  • delete (3003)
  • disable (3005)
  • enable (3007)
  • list (3009)
  • set (3011)
  • summary of (3000)
  • TCP/IP host services monitoring commands
  • dump (3016)
  • interface (3018)
  • ping (3020)
  • routers (3024)
  • summary of (3015)
  • traceroute (3022)
  • TCP/UDP source and destination port numbers (3088)
  • test (2940)
  • threading
  • AppleTalk end stations (2776)
  • IP end-stations (2773)
  • IPX end stations (2775)
  • timeout
  • CIP (3556)
  • timer
  • refresh (3601)
  • TN3270E Server (3120)
  • TOS filtering support (3095)
  • traceroute
  • BGP monitoring command (3387)
  • IP monitoring command (3200)
  • IPX monitoring commands (3824)
  • OSPF monitoring command (3296)
  • TCP/IP host services monitoring command (3023)
  • translation cache
  • clearing (3661)
  • displaying (3665)
  • Transparent bridge (STB)
  • bridge ID (2614)
  • description of (2604)
  • Ethernet packet format translation (2621)
  • network requirements (2609)
  • on 10/100 Ethernet (2622)
  • on FDDI (2623)
  • operation of (2612)
  • port ID (2615)
  • root bridge ID (2613)
  • routers and bridges (2606)
  • shaping the spanning tree (2617)
  • spanning tree bridges (2620)
  • terminology and concepts (2625)
  • aging time (2627)
  • bridge (2629)
  • bridge address (2631)
  • bridge hello time (2633)
  • bridge identifier (2635)
  • bridge maximum age (2637)
  • bridge priority (2639)
  • designated bridge (2641)
  • designated port (2643)
  • filtering and permanent databases (2645)
  • parallel bridges (2647)
  • path cost (2649)
  • port (2651)
  • port ID (2653)
  • port number (2655)
  • port priority (2657)
  • resolution (2659)
  • root bridge (2661)
  • root port (2663)
  • spanning tree (2665)
  • tunnel
  • ASRT bridge configuration command (2844)
  • tunnel configuration commands
  • add (2859)
  • delete (2862)
  • join (2865)
  • list (2868)
  • tunnel feature
  • prompt (2799)
  • tunneling
  • bridge tunnel (2668)
  • type (3083)
    • U
  • UDP destination
  • adding (3124)
  • UDP forwarding
  • enabling/disabling (3121)
  • udp-forwarding
  • IP monitoring command (3202)
  • update
  • IP configuration command (3161)
  • IPX filter configuration commands (3780)
  • NetBIOS filtering configuration command (2963)
    • V
  • virtual channel connection (VCC)
  • CIP (3564)
  • Virtual Router Redundancy Protocol, configuring (3128)
  • vrid
  • IP monitoring command (3204)
  • vrrp
  • IP monitoring command (3206)
    • W
  • weight
  • OSPF monitoring command (3304)

    • [ Top of Page | Previous Page | Table of Contents | Index ]